Alumina is a cost effective and widely used material in the family of engineered ceramics


1. The Manufacturing Process of Wear Resistant Ceramic Lined Steel Pipe and Elbows:
SHS-ceramic steel pipe and elbow create a new generation of abrasion and corrosion resistant engineering pipeline which are produced in a way of Self-propagating High-temperature Synthetic process.
Wear resistant elbows are composed of three layers: ceramic, intermediate, and steel layers. The ceramic layer is formed by molten alumina at a temperature above 2500 degree.
The molten alumina produced from the reaction Fe2O3+2Al=2Fe+Al2O3 spreads on the inside wall of the steel pipe under the influence of a centrifugal force, then solidifies, so the ceramic layer has high density and smooth surface and bonds to the elbow.
2.Features of Alumina Ceramic
Alumina is a cost effective and widely used material in the family of engineered ceramics. Alumina ceramics have been developed and optimized for maximum wear resistance and corrosion resistance. A high density, diamond like hardness,fine grain structure and superior mechanical strength are the unique properties that make it the material of choice for a wide range of demanding applications.Ceramic has uses similar to Cast Basalt but it has greater resistance to wear in high velocity applications and impact resistance in extreme dynamic systems .
3.Product: Wear Resistant Elbows/Bends
Size: DN40-DN600
Wall Thickness: 3-10mm
Housing Material: Seamless Carbon Steel
Inner Material: 95% Alumina Ceramic
Ceramic Thickness: 3 to 6 mm
Normal Operation Velocity: 20-35m/s
Normal Operation Temperature: -50---800degree
4..Obvious performance of wear resistant elbows :
1. Heat-resistance, -50 - 800 Celsius degree
2. Easy Installation and Anti-Scaling
3. Abrasion-Resistance and hardness, is above 9.0
4. Corrosion-Resistance,10 times of stainless steel pipe
5. Economical Cost, 20-30% lower than that of anti-abrasion alloy steel elbows.
5.Application Fields
Paper Making: For conveying pulp.
Shipping: For clearing shipping channels and sediment transportation.
Metal Mines: For conveying tailings, concentrates and backfill minerals.
Coal Preparation Plants: For conveying dense media, mixture and coal slurry.
Power Plants: For deashing, deslagging, coal dropping, powder transportation
Alumina Tile Alumina Mosaic Alumina Cylinder Alumina Tube Ceramic rubber composite 

We can supply the customized product according to customer requirement.
www.chemshun.com

contact  us

Tel:+86-799-2181004/ 2181002 / 6790784
Fax：86-799-6790785
SKYPE: PXCHEMSHUN
MSN: OFFICE@CHEMSHUN.COM

评论

发表评论

此博客中的热门博文

What are the characteristics of abrasion-resistant ceramic tiles?

What are the characteristics of abrasion-resistant ceramic tiles?  Abrasion-resistant ceramic tiles are widely used in many projects, in the pit furnace is also built with a wear-resistant ceramic tiles, wear-resistant ceramic tiles not only to fire resistance, high temperature requirements, but also to wear requirements, Introduce the impact of wear-resistant ceramic tile wear-resistant factors which have! Abrasion resistance of  abrasion-resistant ceramic tiles  depends on the composition and structure of wear-resistant ceramic tiles. When the abrasion-resistant ceramic tiles are composed of dense polycrystals composed of single crystals, the wear resistance depends on the hardness of the mineral crystals. High hardness, high wear resistance of the material. When the mineral crystals are non-isotropic, the grain size is small and the wear resistance of the material is high. When the material from the multi-phase composition, the wear resistance of the material ...
阅读全文

What are interlocking wear-resistant ceramic tile liner ?

图片
  The shape of ordinary wear-resistant ceramic tiles is a square sheet structure, and they are arranged in rows and columns. There are linear seams between the rows and columns of wear-resistant ceramic sheets. The linear seams along the direction of fluid flow are A smooth fluid scouring gap is formed.      In addition to the normal wear of the fluid on the surface of the wear-resistant ceramic sheet, the erosion gap becomes a breakthrough door for the fluid to wear the side of the ceramic sheet. Under the long-term erosion of the fluid, the seam will gradually widen and the degree of wear will become more and more serious. , the change of connection affects the service life of the wear-resistant ceramic sheet, which in turn affects the protection effect of the anti-wear parts. After this kind of wear-resistant ceramic sheets are pasted, the adjacent ceramic sheets do not have an interlocking effect with each other. The pasting is not strong during installation...
阅读全文

How to improve the wear resistance of Al2O3 ceramics

图片
Al2O3  wear resistant ceramics  as lining of mill and grinding medium, in the construction of sanitary ceramics and other industries has become more and more widely applied. Use material of Al2O3 content is between 90% ~ 99% commonly, in order to produce high density, good wearability ceramic body, must have a suitable raw material performance, forming method can obtain high green density and must have the appropriate sintering temperature and holding time, only the three elements meet the requirements at the same time, in order to achieve this purpose. Chemshun company has been working hard to develop, research, innovation design is most suitable for customer requirements of high alumina  wear resistant ceramic  products.
阅读全文