Inert Ceramic ball production process

Pingxiang Chemshun Ceramic Co.,ltd`s inert ceramic ball can be divided into dry powder forming and sliver forming.

The two processes have different characteristics, and the appropriate production process should be selected according to the specific requirements of customers.
Details of dry powder forming process:
Dry formation is mainly composed of the following processes: raw material inspection and calculation formula according to customer requirements needed for raw material and the weight of the raw material formula to make use of crushing equipment directly crush (200 mesh) - by isostatic pressing on its forming - directly box sinter to more than 1200 degrees to out of the box and testing finished products, qualified product packaging factory.
Chemshun Ceramics Manufacturer can supply inert ceramic ball with alumina content 99%, 90%,23~30%, 15~23%. welcome to contact and visit: www.chinachemicalpacking.com

评论

发表评论

此博客中的热门博文

What are the characteristics of abrasion-resistant ceramic tiles?

What are the characteristics of abrasion-resistant ceramic tiles?  Abrasion-resistant ceramic tiles are widely used in many projects, in the pit furnace is also built with a wear-resistant ceramic tiles, wear-resistant ceramic tiles not only to fire resistance, high temperature requirements, but also to wear requirements, Introduce the impact of wear-resistant ceramic tile wear-resistant factors which have! Abrasion resistance of  abrasion-resistant ceramic tiles  depends on the composition and structure of wear-resistant ceramic tiles. When the abrasion-resistant ceramic tiles are composed of dense polycrystals composed of single crystals, the wear resistance depends on the hardness of the mineral crystals. High hardness, high wear resistance of the material. When the mineral crystals are non-isotropic, the grain size is small and the wear resistance of the material is high. When the material from the multi-phase composition, the wear resistance of the material ...
阅读全文

What are interlocking wear-resistant ceramic tile liner ?

图片
  The shape of ordinary wear-resistant ceramic tiles is a square sheet structure, and they are arranged in rows and columns. There are linear seams between the rows and columns of wear-resistant ceramic sheets. The linear seams along the direction of fluid flow are A smooth fluid scouring gap is formed.      In addition to the normal wear of the fluid on the surface of the wear-resistant ceramic sheet, the erosion gap becomes a breakthrough door for the fluid to wear the side of the ceramic sheet. Under the long-term erosion of the fluid, the seam will gradually widen and the degree of wear will become more and more serious. , the change of connection affects the service life of the wear-resistant ceramic sheet, which in turn affects the protection effect of the anti-wear parts. After this kind of wear-resistant ceramic sheets are pasted, the adjacent ceramic sheets do not have an interlocking effect with each other. The pasting is not strong during installation...
阅读全文

How to improve the wear resistance of Al2O3 ceramics

图片
Al2O3  wear resistant ceramics  as lining of mill and grinding medium, in the construction of sanitary ceramics and other industries has become more and more widely applied. Use material of Al2O3 content is between 90% ~ 99% commonly, in order to produce high density, good wearability ceramic body, must have a suitable raw material performance, forming method can obtain high green density and must have the appropriate sintering temperature and holding time, only the three elements meet the requirements at the same time, in order to achieve this purpose. Chemshun company has been working hard to develop, research, innovation design is most suitable for customer requirements of high alumina  wear resistant ceramic  products.
阅读全文