Alumina ceramic abrasion resistant tile several installation way

  Alumina ceramic abrasion resistant tile liner is recognized by everyone, but people are more concerned about whether the alumina ceramic abrasion resistant tiles do not fall off and fragment,Pingxiang chemshun ceramics co.ltd is 15 year ceramics manufacturer, Here are some wear resistant ceramic installation technology 

Paste type:

    Adhesive type is that the use of viscose alumina ceramic abrasion resistant tile will be pasted in the inside surface of the device. This method is simple, low cost, especially suitable for large-scale construction site, saving maintenance time. However, because the ceramic epoxy resin adhesive is mainly organic ingredients, not high temperature (maximum temperature 150 ℃), and easy to aging. Therefore, this posting method is only applicable to the work environment at room temperature.

Welding type:

    Welding type is that alumina ceramic abrasion resistant tile is welded in the device through the center of the wear resistant ceramics, together with the adhesive paste type to achieve the two layers of secure intent. Welding suitable for high temperature pipe (500 ℃) or a slight impact on the site, such as the end of the kiln dust pipe, tower import and export of humidifier pipes.

Swallowtail loaded cassette: 

    The swallow-tailed locking type is a device method in which two trapezoidal bars are welded in parallel to the device to form the dovetail groove and then the dovetail ceramic is inserted into the dovetail groove. This method of sophisticated and reliable technology, can withstand high temperature of 700 ℃, particularly suitable for moving parts, such as fan impeller wear. However, this technology is complex, only suitable for flat 

Chemshun Ceramics offer more alumina ceramic abrasion resistant tile products for industry abrasion repair. if you have mining , cement , coal , steel industry wear damage problem , chemshun ceramics is available for your contact by office@chemshun.com 

评论

发表评论

此博客中的热门博文

What are the characteristics of abrasion-resistant ceramic tiles?

What are the characteristics of abrasion-resistant ceramic tiles?  Abrasion-resistant ceramic tiles are widely used in many projects, in the pit furnace is also built with a wear-resistant ceramic tiles, wear-resistant ceramic tiles not only to fire resistance, high temperature requirements, but also to wear requirements, Introduce the impact of wear-resistant ceramic tile wear-resistant factors which have! Abrasion resistance of  abrasion-resistant ceramic tiles  depends on the composition and structure of wear-resistant ceramic tiles. When the abrasion-resistant ceramic tiles are composed of dense polycrystals composed of single crystals, the wear resistance depends on the hardness of the mineral crystals. High hardness, high wear resistance of the material. When the mineral crystals are non-isotropic, the grain size is small and the wear resistance of the material is high. When the material from the multi-phase composition, the wear resistance of the material ...
阅读全文

What are interlocking wear-resistant ceramic tile liner ?

图片
  The shape of ordinary wear-resistant ceramic tiles is a square sheet structure, and they are arranged in rows and columns. There are linear seams between the rows and columns of wear-resistant ceramic sheets. The linear seams along the direction of fluid flow are A smooth fluid scouring gap is formed.      In addition to the normal wear of the fluid on the surface of the wear-resistant ceramic sheet, the erosion gap becomes a breakthrough door for the fluid to wear the side of the ceramic sheet. Under the long-term erosion of the fluid, the seam will gradually widen and the degree of wear will become more and more serious. , the change of connection affects the service life of the wear-resistant ceramic sheet, which in turn affects the protection effect of the anti-wear parts. After this kind of wear-resistant ceramic sheets are pasted, the adjacent ceramic sheets do not have an interlocking effect with each other. The pasting is not strong during installation...
阅读全文

How to improve the wear resistance of Al2O3 ceramics

图片
Al2O3  wear resistant ceramics  as lining of mill and grinding medium, in the construction of sanitary ceramics and other industries has become more and more widely applied. Use material of Al2O3 content is between 90% ~ 99% commonly, in order to produce high density, good wearability ceramic body, must have a suitable raw material performance, forming method can obtain high green density and must have the appropriate sintering temperature and holding time, only the three elements meet the requirements at the same time, in order to achieve this purpose. Chemshun company has been working hard to develop, research, innovation design is most suitable for customer requirements of high alumina  wear resistant ceramic  products.
阅读全文