About the wear-resisting ceramic storage and installation of the pipe elbow

Wear resistant ceramic pipe elbow of wear resisting ceramics is AL2O3 as the main raw material, with rare metal oxide as the flux, through one thousand seven hundred baidu high temperature roasting of special alumina ceramic, then respectively with special rubber and high strength of organic and inorganic binder paste on the pipe wall.Has good wear resistance, corrosion resistance, high temperature resistant performance is good, low engineering cost, long life, light weight, convenient transportation and installation, are widely used in cement, steel, chemicals, paint, paper making, medicine, and thermal power plant and other industries. 

The storage of wear resistant ceramic pipe bend:

1, long time storage wear-resistant ceramic pipe elbow, should be checked regularly, generally outside the processing surface must be kept clean, remove dirt and rust removal. 

2, wear resistant ceramic pipe elbow should be neatly stored in the workshop drafty dry shelter place, can not heap, or piled up in open air. 

3 often, keep the steel elbow dry and leak, pay attention to the cleanness and neatness elbow, deposit should be in the correct way of storing bend.

Wear resistant ceramic pipe elbow of installation:

1, installation, wear resistant ceramic pipe elbow shall be according to the connection device together on the road at the pipe of wear-resisting pipe, according to the pipeline to use the correct installation position for installation.

2, usually wear resistant ceramic pipe elbow can be installed in any place of pipe line installation points, but must be beneficial to test equipment maintenance, suggested by the direction of the flow direction of medium wear-resisting ceramic pipe elbow, should be vertical disc into the upper, elbow must be installed level.

3, wear-resistant ceramic pipe elbow while installing observe whether seal sealing, prevent the conveying process fluid leak phenomenon, affect the normal operation of the pipeline