How to avoid wear resistant ceramic tile falling off in application

How to avoid wear resistant ceramic tile falling off in application
Aluminium oxide wear resistant ceramic tile is well known as industrial maintenance materials for abrasion resistance.Because of its wide application in hopper, cyclone, chute,bunker,pipeline, different shapes are designed to meet different operation environment like high temperature, high speed operation,high corrosion and abrasion area etc. Which aim to extend working life of industrial ceramic linings
This is fact that, wear resistant ceramic tile may fall off when installed in equipment parts. Then equipment down time and ceramic purchase was taken for repair. So how to avoid alumina ceramic tile falling off in application ?
Chemshun Ceramics manufacturer want to tell you the tips of avoiding ceramics tile falling off according to our experience.
  • Pay attention to high temperature environment : most of epoxy resin adhesive is used for ceramics installation. Alumina ceramics can resist 1700 centi-degree , but epoxy resin adhesive only can use at the temperature range of - 60~150℃. So it is important to avoid high temperature environment.
  • Keep the installation area clear : any impurities or dust in machine area will easily cause wear resistant ceramic to drop off, so dust removal is necessary before wear resistant ceramic tile installation .
Chemshun Ceramics manufacturer mainly supply kinds of abrasion resistant ceramics for bulk material handling equipment.

评论

发表评论

此博客中的热门博文

What are the characteristics of abrasion-resistant ceramic tiles?

What are the characteristics of abrasion-resistant ceramic tiles?  Abrasion-resistant ceramic tiles are widely used in many projects, in the pit furnace is also built with a wear-resistant ceramic tiles, wear-resistant ceramic tiles not only to fire resistance, high temperature requirements, but also to wear requirements, Introduce the impact of wear-resistant ceramic tile wear-resistant factors which have! Abrasion resistance of  abrasion-resistant ceramic tiles  depends on the composition and structure of wear-resistant ceramic tiles. When the abrasion-resistant ceramic tiles are composed of dense polycrystals composed of single crystals, the wear resistance depends on the hardness of the mineral crystals. High hardness, high wear resistance of the material. When the mineral crystals are non-isotropic, the grain size is small and the wear resistance of the material is high. When the material from the multi-phase composition, the wear resistance of the material ...
阅读全文

What are interlocking wear-resistant ceramic tile liner ?

图片
  The shape of ordinary wear-resistant ceramic tiles is a square sheet structure, and they are arranged in rows and columns. There are linear seams between the rows and columns of wear-resistant ceramic sheets. The linear seams along the direction of fluid flow are A smooth fluid scouring gap is formed.      In addition to the normal wear of the fluid on the surface of the wear-resistant ceramic sheet, the erosion gap becomes a breakthrough door for the fluid to wear the side of the ceramic sheet. Under the long-term erosion of the fluid, the seam will gradually widen and the degree of wear will become more and more serious. , the change of connection affects the service life of the wear-resistant ceramic sheet, which in turn affects the protection effect of the anti-wear parts. After this kind of wear-resistant ceramic sheets are pasted, the adjacent ceramic sheets do not have an interlocking effect with each other. The pasting is not strong during installation...
阅读全文

How to improve the wear resistance of Al2O3 ceramics

图片
Al2O3  wear resistant ceramics  as lining of mill and grinding medium, in the construction of sanitary ceramics and other industries has become more and more widely applied. Use material of Al2O3 content is between 90% ~ 99% commonly, in order to produce high density, good wearability ceramic body, must have a suitable raw material performance, forming method can obtain high green density and must have the appropriate sintering temperature and holding time, only the three elements meet the requirements at the same time, in order to achieve this purpose. Chemshun company has been working hard to develop, research, innovation design is most suitable for customer requirements of high alumina  wear resistant ceramic  products.
阅读全文