What are the characteristics of abrasion-resistant ceramic tiles?

What are the characteristics of abrasion-resistant ceramic tiles?

 Abrasion-resistant ceramic tiles are widely used in many projects, in the pit furnace is also built with a wear-resistant ceramic tiles, wear-resistant ceramic tiles not only to fire resistance, high temperature requirements, but also to wear requirements, Introduce the impact of wear-resistant ceramic tile wear-resistant factors which have!

Abrasion resistance of abrasion-resistant ceramic tiles depends on the composition and structure of wear-resistant ceramic tiles. When the abrasion-resistant ceramic tiles are composed of dense polycrystals composed of single crystals, the wear resistance depends on the hardness of the mineral crystals. High hardness, high wear resistance of the material. When the mineral crystals are non-isotropic, the grain size is small and the wear resistance of the material is high. When the material from the multi-phase composition, the wear resistance of the material with the bulk density or porosity has a direct relationship, but also with the binding strength between the various components. Therefore, at a room temperature of a certain wear-resistant ceramic tiles in terms of its wear resistance is proportional to its compressive strength, sintering good wear-resistant ceramic tiles wear resistance is also good.

Abrasion-resistant ceramic tiles and the wear resistance of the temperature, and some wear-resistant ceramic tiles such as high-alumina brick, it is generally believed that it at a certain temperature (such as in 700 ~ 900 ℃ below the elastic range), the higher the temperature wear resistance The lower the temperature, the higher the elastic modulus of wear-resisting ceramic tile, the lower the wear resistance. When the temperature rises to reach the maximum value of the elastic modulus, with the decrease of elastic modulus, but the wear resistance has increased. Such as clay brick in 1200 ~ 1350 ℃, the wear resistance is even better than those at room temperature. When the temperature is further increased, up to 1400 ℃ or more due to refractory products in the liquid viscosity decreased dramatically, the wear resistance decreases. Some wear-resistant ceramic tiles such as wear-resistant ceramic tiles containing chrome, with increasing temperature, increased wear resistance.
Abrasion-resistant ceramic tiles composition and structure, and temperature will affect its wear resistance, so the company hopes to produce wear-resistant ceramic tile manufacturers can pay more attention to the above factors, thus creating wear-resistant ceramic tiles wear Sex will be more excellent!

评论

发表评论

此博客中的热门博文

What are interlocking wear-resistant ceramic tile liner ?

图片
  The shape of ordinary wear-resistant ceramic tiles is a square sheet structure, and they are arranged in rows and columns. There are linear seams between the rows and columns of wear-resistant ceramic sheets. The linear seams along the direction of fluid flow are A smooth fluid scouring gap is formed.      In addition to the normal wear of the fluid on the surface of the wear-resistant ceramic sheet, the erosion gap becomes a breakthrough door for the fluid to wear the side of the ceramic sheet. Under the long-term erosion of the fluid, the seam will gradually widen and the degree of wear will become more and more serious. , the change of connection affects the service life of the wear-resistant ceramic sheet, which in turn affects the protection effect of the anti-wear parts. After this kind of wear-resistant ceramic sheets are pasted, the adjacent ceramic sheets do not have an interlocking effect with each other. The pasting is not strong during installation...
阅读全文

How to improve the wear resistance of Al2O3 ceramics

图片
Al2O3  wear resistant ceramics  as lining of mill and grinding medium, in the construction of sanitary ceramics and other industries has become more and more widely applied. Use material of Al2O3 content is between 90% ~ 99% commonly, in order to produce high density, good wearability ceramic body, must have a suitable raw material performance, forming method can obtain high green density and must have the appropriate sintering temperature and holding time, only the three elements meet the requirements at the same time, in order to achieve this purpose. Chemshun company has been working hard to develop, research, innovation design is most suitable for customer requirements of high alumina  wear resistant ceramic  products.
阅读全文